Ver.2 appears in the magic line amplifier that makes CDs and digital sound sources like analog sounds

Re -appeared as version 2 for the very popular last time!The sound of the CD is tight!I want to listen to the sound of the CD with a more analog -like sound!It will be a recommended item for those who say.It is easy to use.It will be a line AMP that only sandwiches between the CD and the amplifier.The sense of reality and balance of the current system sounds changes drastically.For those who want to listen to digital sound sources such as CDs and high -resolution in a comfortable sound like analog using the current device!This analog mix amplifier will be a solution!

This Ver.2.What is the difference?

This AMP is assembled in carefully selected parts.

Ver.The part of the wire, which is the key to sound quality, has changed to 2.

Jazz / Rock type wires have been changed to General picturelectronic's General picturelectronic General picturelectronic's 40s enamel line from Siemens.

G.picture.The company will be the largest electrical manufacturer of US electricity that inherited the company established by picturedison.

Such wires have the advantage of being able to produce stable products using stable materials to produce stable products.

G.picture.The enamel line has a good sound, but the cover of the enamel on the surface is weak, so it is covered with paper tape as reprocessing.

It takes time, but there is no sound.

The Classic type uses the same German 50s enamel line as last time.

The beginning is serialized in STEREO magazine!

We are serializing in STEREO magazine.The serial name is "Craft Vintage".

Various items such as speakers, amplifiers, monaural mix AMPs, analog players grade UP techniques, etc. are proposed in serialization.

CDs and high -resolution seem a little poor at the current analog boom at the meeting with the editor -in -chief!That was the story.

Certainly, the CD, especially the sound source of the analog era, has many sound sources that are difficult to hear because there are many recordings that are not united due to good sounds and records, etc., and have a strange balance of left and right sounds.

However, although it is so popular as a music medium, it is no longer evaluated by the analog boom.If the sound of the digital sound gets better, everyone should be happy to listen!

Can you manage digital sound sources in sound like analog sound?In the series, we started with a project to make a line amplifier that makes the CD sound a fun sound like an analog sound.

The finished product is now useful at the editor -in -chief's home.

I want to enjoy JAZZ and ROCK system mainly!

*In the actual product, Analog Mix AMP JAZZ / ROCK Ver.It will be written in 2.

In the JAZZ and ROCK system, there are many ambiguous sound sources that are not known as stereo or monaural in the late 1950s and 60s, and there are many sound sources where vocals can only be heard from the right.

If it is a digital sound source, the left and right separation is too good and you can not listen to it with the left and right sound sources!

There are many sound sources.

Also, if you turn the knob, the sound will depend on the center and the power will increase, so it is also recommended for those who want to listen to a more powerful sound.

I think that there are many sound sources that are bad for sound sources such as minor ROCK systems, and if the recording is poor, the sound is different.

So this AMP comes in.

I want to listen to Classic comfortably!

*In the actual product, Analog Mix AMP JAZZ / ROCK Ver.It will be written in 2.

Classic still wants the air and sound of the instrument to come out beautifully.

There are also excellent recording in the early 50s and early 60s of the early stereo, but there are many sound sources with a poor balance of sound.

Also, in recent recording, there are many sound sources that the sound is so good that the sound is too different and the sound is not synchronized.

And I think there are many people who do not have a fixed orchestra at the sound center.

If you use this AMP, it will sound like a sound image will come to the center when you turn the knob, so it is recommended for such people.

It will be recommended AMP for such people.

TpictureSLAの色付けのない抵抗に、空気感の良く出る西ドイツのvintage半田に癖のないエナメル線を組み合わせております。

It would be great if you could listen to the CD sound with a comfortable sound like an analog.

Analog boom?

Why is it an analog record boom now in the digital age?

because it's cool?

Because the mass media recommends it?

Because the artists recommend it?

It can be considered in various ways, but the sound is still good!Because it feels good!

We are thinking about it.

No matter how good it is, if you don't feel good, you won't hear it.

It would be great if everyone could enjoy this pleasant sound again.

What is the difference between digital sound playback and analog sound playback?

I started by thinking about what the difference between the digital sound source and the analog sound source is.

What is the difference in sound when you listen to analog sound sources such as records and digital sound sources such as CDs with the same sound source, but with the same amplifier and speakers?

In the case of digital source, the source of the sound source enters the AMP as it is, but the record playback is different.Pick up the sound with a cartridge, amplify it with a phonoi criser, equalize, and then enter the amplifier.

So what is the difference between the record playback sound and the digital playback sound?

The possible answer is the difference between the playback performance in the cartridge and the digital playback performance!

Furthermore, I thought that there was a difference in the performance of the channel paration.

Channel separation is the separation of the left and right sounds.

The larger the number, the higher the separation of the left and right sounds.

Specifically, in the case of a CD, there is a performance of a 140 -dB channel paration, but the analog cartridge has only a 30 -dB channel separation.

The left and right sounds have become quite mixed.

However, the better the channel separation performance, the better the sound is separated and the performance is good, but is it really a pleasant sound?

Please think about it.Is there any sound that can only be heard from the right ear in this nature?

Is there any sound that can only be heard in the opposite side?

That's right.The digital sound is too good to sound natural.

So how can you make it naturally like an analog record?

The answer is simple.

Cross the left and right channel separation of the digital sound source, and gradually mix the left and right sounds little by little.

The result was that a mixed line amplifier to make the left and right separation worse and approach the separate separation during analog playback.

However, if you make it normally, the sound will be reduced by passing through an excess circuit, and the channel separation can be solved, but the sound quality will deteriorate.

So I thoroughly simply and sticked to parts.

However, it is not enough to use parts that are too good,

The sound you aim for is an analog taste and a pleasant sound.

It is easy to use.

No exaggerated devices are required.

Just put the mix AMP between the CD player (including DAC) and the amplifier.

When the knob is rotated clockwise, the left and right sounds are mixed, and the localization comes to the center.

The feeling of power that was different from the center also came to the center.

If you turn the knob completely, it will be a monaural sound source instead of a stereo sound source.

You can choose a position that suits your room or source, so please try it for each source.

If you do not turn the knob, you will pass the signal without any change.

Sorting of internal parts (resistance edition)

We listen to various resistance from military to people, such as Dale, Clarostat, Klangfilm, RFT, ROE, ROSENTALE, TESLA.

Since it is used as a stereo, we do not use a resistor with poor accuracy.

This time, we select high -quality resistance that can only be obtained here and not available elsewhere.

The number is limited for vintage products.

All resistance is used after measuring with a tester and pairing.

Selection of internal parts (solder)

Handa also listened to the STEREO magazine from the current solder to the vintage solder.

This time, we also listen to the USA vintage solder, copper silver solder, German vintage solder, UK vintage solder, etc., and select analog sounds.

This is also a selection unique to this product, which uses a solder that is not available anywhere else.

The case is domestically produced, the knob is ordered from France, and the parts are concerned.

I want to make something simple, the case is made of aluminum die -cast by domestic manufacturer TAKACHI.

We will order from a domestic manufacturer that can rest assured that processing and printing are safe.

The knobs that become the central item of the design are ordered from France.

The RCA terminal also uses 24K -plated luxury parts.

Handmade by arrangement!

The interior is handmade by the arrangement line, and we are actually finished by one and one.Who makes it, no matter how much design and parts are concerned?

The sound will change depending on who assembles.

I don't want to be outsourced that I don't know who is making it.

We will process vibration control measures inside the benefits.

As a privilege, we will also control vibration control using non -dielectric materials using ceramic tiles.

VintageAudio specialty store "Vintagejoin" is produced and tuned.You can also listen to it at the store.

We are making products with the aim of a pleasant sound and a comfortable sound, not an audio sound.

In addition, we try not to make products as simple as possible.We are using a lot of parts that are concerned about sorting parts and cannot be obtained anywhere else.

We will continue to propose items that are more enjoyable and comfortable than performance.

If you actually want to see it and want to listen, please come to the store with a sound source such as a CD you want to listen to.Because of the Corona whirlpool, please contact us in advance when you come to the store and make a reservation.

About delivery time

If a project is established, we will immediately enter the custom processing order of the domestic aluminum die -cast.

With about 6 weeks, it will be assembled from the order for the order, and after the wiring work, we will start delivering.

Depending on the production status of the aluminum die -cast maker, the delivery time may be changed or delayed.Excuse me, but please note.

This time, the production volume is limited due to the stock number of parts used in all items, so the production of the item will be closed when the planned production volume is reached.

If the parts can be delivered again and can respond, we will report them through "Activity Report" as needed.